Fancort Industries, Inc. - SMT Lead Forming Equipment and Services

SMT Lead Forming Equipment & Services

For more information, contact:
Robert Antonelli
1-888-FANCORT ext. 219

Fancort SMT / Gull Wing Tool Selector Trim and Form Equipment
Requirements	Equipment
High mix, low volume, R&D: *Requires operator setup and the most part handling	One-Sided Universals: F-1B/3A F-1B/1 *Hand or air press
High mix, moderate volume: *Requires setup and some part handling, but much less than one-sided universals	Flex, Two-Sided Universal: Manual standoff control #F-1A/Flex Automatic standoff control #F-1F/Flex
Low to moderate volume, very expensive parts: Requires no operator setup and minimal part handling holds most accurate tolerance	Dedicated Tools: Manual standoff control #F-1A/4 Automatic standoff control #f-1F/4
Fiberoptic Devices: *Pumps and laser diodes	Dedicated Tools: *Through-hole and surface mount
Medium production from lead frames: *QFPs, SOICs, BGA, DIPs	Semi-Automatic Systems Tray to tray Tube to tube, or tube to tape
Ph. 973-575-0610 Fax 973-575-9234 www.fancort.com rantonelli@fancort.com