Optical Component Forming

Lead Trim and Form Equipment For Optical Components

Fancort will design and build trim/form tools for surface-mount or through-hole applications for a wide variety of optical components. We can help you with the design parameters that allow the part to be properly formed with sufficient lead length. These tools are designed to prevent stress to any of the delicate areas, including any glass seals.

View recent fiberoptic form and trim application.
Download the Tooling Newsletter (PDF).

P/N F-1A/FOC Flatpack headers with fiberoptic cable for SMT	P/N D-1/FOC DIP headers with fiberoptic cable for through-hole
Flatpack SMD Tooling for Fiberoptic Headers with Cable Part Number F-1A/FOC	Quadpack SMD Tooling for Fiberoptic Headers with Cable Part Number F-1A/4FOC
Mount die 90 degrees to the front of shoe Rubber boot to cover springs Special support to hold fiberoptic cable Clamps, forms and trims in one operation Manual standoff control with built-in, pressure-free micrometer Dead stop to prevent over travel Conforms to Mil std. 2000 Holds tip-to-tip tolerance of +/- .005 Fits Fancort hand or air presses Optional Tooling for DIP headers with fiberoptic cable One-year warranty	Mounts 90 degrees to the front of the die shoe Rubber boots to cover springs Special support to hold fiberoptic cables (not shown) Clamps, forms and trims in one operation Manual standoff control with built-in, pressure-free micrometer Built-in lifter mechanism to remove formed parts Holds tip-to-tip tolerance of +/- .005 Process all four sides simultaneously Fits Fancort hand or air presses Conforms to Mil std. 2000 One-year warranty