Fancort Industries, Inc. - SMT Lead Forming Equipment and Services

Universal System One-Sided

Flex System Two-Sided

Dedicated Tooling

Lead Cutters

Component Processing Services

Production Aids

Bench Presses

Lead Reforming

Technical and Spec Sheets

Custom Applications

SMT Lead Forming Equipment & Services

For more information, contact:
Robert Antonelli
1-888-FANCORT ext. 219

SMT Lead Forming Equipment & Services Catalog

Flex System Two-Sided
Fancort's Flex System is the most versitale and accurate adjustable production tool on the market for most Flat packs and Quad packs. The Flex is the only sysem that can accurately center Quad packs in a two-sided system allowing the leads of any Quad pack to meet the X-Y pads on a PCB every time. The centering station and the loader also reduce operator error and handling. The Floating Anvil Automatic System physically measures the standoff height of every part run in the system. A complete system consists of the Flex Tool, Floating Anvil Press, Centering Station and Loader with vacuum. The system is provided with one complete set of forming sets and cutter, your choice of dimensions, or we can provide a standard JEDEC, NASA or Mil spec footprint.
Note for quads to be used in this tool the tie bars need to be removed, P/N F-3A universal tie bar cutter is recommended.
Flex FAB Sheet, Features And Benefits Taking the Lead on Lead Forming (PDF) E Flex and Flex Comparisons (PDF)	Adjustable tip-to-tip length using hand wheel and precision ball screw with digital readout and anti-backlash feature. Simple changeover of four die members to vary all critical dimensions for most SMT footprints and packages, including plastic packages and large packages. Automatic Standoff Control with patented, electronic floating anvil design. Floating Anvil sequence of operation Centering station with manual loader for higher throughput and hands-off operations. View the Two-Sided Universal Lead Forming System Quad & Flat Pack Specification Sheet. Download the Flex brochure (PDF). For Quads: Tie Bars and or Tie Bar Corners need to be removed prior to using the FLEX. The flex system is the most accurate and adjustable tool we make. Click here for flex limitations. Plated to prevent rusting

* Three models are available. The standard model processes packages with body length up to 2.000", the large model up to 3.000", and Jedec system for plastic packages with short shoulders.