Need help? Try our Tool Selector

Component Processing Services:  Matrix Trays

• Hold most quadpacks or flatpacks up to 4" long
  
  
• Moveable plastic slides are molded in PPA with carbon fiber, with a surface Resistivity of 10E5-10E7 ohm/cm
  
  
• Supports are non-sloughing and tolerate 170C
  
  
• ESD foam with conductive film in the cover for cushioning and component thickness variations
  
  
• Tray and cover are extruded aluminum, finished in ESD safe, clear chromate
  
  
• Standard unit measures 6" x 12" x 1" with cover
  
  
• Thumb screws to lock the cover to the base
  
  
• Optional model for pick and place machines--low profile and fixed X-Y registration
  
  
• Patent No. 5,370225
  
  
• Dedicated matrix trays available for storage, transport or pick and place; fabricated in aluminum
  
  
• Special dedicated single part shipping and storage trays: DSCN1316 and DSCN1317
  
  
• Molded JEDEC plastic trays can be machined to hold ten flatpacks or quadpacks
  
  
• Optional 6" x 4" adjustable tray to hold two devices; P/N AMT-6x4-SP
  
  
• Standard top brazed FPGA in an adjustable matrix tray

View Adjustable Marix Tray data sheet (PDF).
View schematic.