For more information, contact: Ron Corey
1-888-FANCORT ext. 217
UNI-CYCLONE® High Speed, Centrifugal Mixers
Mix and Defoam with Simultaneous Rotation and Revolution
Features:
Rapidly mix high viscosity materials without an impeller into fine uniformity in a very short time without air bubbles using rotational and centrifugal forces
Program mixing mode, speed and time using built-in software; store up to 10 programs; unlimited memory when using a PC
Low maintenance, easy to clean and operate
Unit can handle canisters, syringes and cartridges
Four models to handle mixing weight from 80g to 2kg of material at one time
Centrifugal rotation speeds from 1000 to 2000 rpm
Mixing method is double self-centrifugal rotation
Timer setting from 0 sec to 99 min 50 sec
Safety functions: door sensor, vibration sensor, rotation sensor and emergency stop switch
Power supply: single-phase 100 to 120 V AC or 220 to 230 V AC, 50/60 Hz
PC Software integrated as standard
Basic Operation:
1.0 Load your material container into the mixer
2.0 Adjust the counter balancer to the measured gross weight of the container
3.0 Set timer, mode and speed
Once the mixing recipe is registered to memory, the operation will be as easy as (1) recall memory and (2) press the start button. You can walk away while the mixer processes your materials. No monitoring of the mixer is required.
Materials that can be Mixed and Defoamed by Uni-Cyclone