Fancort Industries, Inc. - SMT Lead Forming Equipment and Services

Universal Racks

Adjustable Racks

ESD Component Trays

Adjustable Fixtures

Production Accessories

Racks and Fixtures

For more information, contact:
Linda Lisa
1-888-FANCORT ext. 227

Adjustable Fixtures for PCB Assembly: Smart Solder Fixtures

Finger Conveyors

Two styles for finger conveyors: hard-coat aluminum or titanium sides
Both styles are fastened with rigid butt joint for strength and squareness
Cross pieces are tubular for strength, lightweight, and ease of attaching moveable accessories

Optional low profile fixture with angled rails to reduce rework

Optional low profile rails for easier hand insertion of components.

F1 aluminum model is lower in cost, has built-in board-holding grooves which require only one moveable rail to support your PCB.

F3 titanium model is lighter in weight, resists solder dragout and corrosion in active flux.

Part Number*	A*	B*	C	D(F1)	D(F3)
F1 or F3-12-18	18.5"	16.5"	12"	9.625"	8.750"
F1 or F3-14-18	18.5"	16.5"	14"	11.625"	10.750"
F1 or F3-15-18	18.5"	16.5"	15"	12.625"	11.750"
F1 or F3-16-18	18.5"	16.5"	16"	13.625"	12.750"
F1 or F3-18-18	18.5"	16.5"	18"	15.625"	14.750"

Molded Solder Rails

Board supports are injection molded in liquid crystal polymer which outperforms all styles of metal rails including titanium

Reduced heat means increased throughput, improved edge soldering, cleaning and drainage

Titanium clips and support fingers permit board expansion, fast loading, unloading and are moveable to accommodate hard-to-hold edges

Reduce rework and improve solder coverage with rails that angle up to 22 degrees

Three styles of standard 1" high rails, and three styles of low profile 3/4" high rails in 18", 22" or custom lengths

Click here for schematic.
Click here for spare parts.

Titanium Finger Rail

Hold board edges with overhanging components by offsetting as illustrated

Three rigid moveable titanium fingers 1/2" wide (B) x 5/16" (C) offset are easy to adjust with thumb screws

Use these supports on one or both sides of the rail

Rail part number is TFR-18 or TFR-22; additional standard supports are TFRS-1/2

Optional narrower supports are 1/8" wide (B) with a 3/4" (C) offset; Part number is TFRS-1/8

Click here for schematic.

'T' Support Rail

* Supports rear of heavy boards

Measures 4" (A) by 6" (B); Part Number SR-T

Custom T rails are available

Solder dam/support

Keep boards from diving into the wave

Available in all sizes for any fixture

To order, specify fixture type and width, e.g. SD-12 is a dam for a 12" finger-style fixture

Sky-Hook

Prevents warpage with large boards and panels

Spring-loaded titanium hook with 6" of travel

Part Number is SH-B; Dimension A is your fixture width